Hustler Equipment Mounted and Linkage Sprayers
Compact, Simple, and Efficient. The All-NEW Applic8r Front Tank Range Compliment a rear-mounted three-point linkage Hustler’s Applic8r sprayer by increasing your capacity with the fitment of an 890L or a 1150L front mount spray module. The short length of an Applic8r front tank gives them game-changing maneuverability compared to other front tank designs especially important in tight gateways, they look great and it reduces the load on the front axle of the tractor The kit comes complete with 8 metres of hose, ball value, and coupling to connect to the rear tank. When ordered with an Applic8r Spray unit, front tank valving is factory fitted to sprayer.
Specifications
Applic8r FM890
| Tank Size: | 890L |
| Flushing Tank: | Optional 100L |
| Hand Washing Tank: | 18L capacity |
| Storage: | Built in toolbox |
| Gauge: | ViziGauge view |
| Lid: | Hingend 455mm lid with basket strainer |
| Features: | UtilityBar, CoupleUp tank filling system |
Applic8r FM1150
| Tank Size: | 1150L |
| Flushing Tank: | Optional 100L |
| Hand Washing Tank: | 18L capacity |
| Storage: | Built in toolbox |
| Gauge: | ViziGauge view |
| Lid: | Hingend 455mm lid with basket strainer |
| Features: | UtilityBar, CoupleUp tank filling system |
Specifications
COMBI RX148
| Round Bales (single layer): | 3-6 |
| Medium Squares: | 6-8 |
| Large Squares (8ft long): | 6-8 |
| Loose Silage (load-level): | 14 m³ | 18.3 yd³ |
| Loose Silage (heaped load): | 16.5 m³ | 21.5 yd³ |
| Maximum Load: | 10,000 kg | 22,046 lb |
| Overall Width: | 2950 mm | 116.1 in |
| Overall Length: | 6750 mm | 265.7 in |
| Overall Height/Loading Height: | 2430 mm | 95.6 in |
| Standard Tyres: | 400 / 60 x 15.5 Flotation Grip Tread |
| Axle: | Tandem Walking Beam |
| Brakes | Optional 2 or 4 wheel braking |
| Weigh Scales: | Optional Feedlink weighing and feed management system |
| Floors (Bed Floor / Cross Floor): | 15 mm (0.6 in) HD Puck Board / 12 mm (0.47 in) HD Puck Board |
| Chains (Bed / X floor / Elevator): | Chainless / Twin 12,000 lb Roller Chains / Twin 12,000 lb Roller Chains |
| Feed bars (Bed / X Floor / Elevator): | Twin Hydraulic Rams / 65 x 35 RHS / 40 x 40 RHS |
| Joystick: | In-cab Electric Control w/ Bales and Silage Mode |
| Hydraulics required: | 2 x double-acting |
| Hydraulic Flow: | 50-70 L/min (80 L/min maximum) | 13.2-18.5 gal/min (21.1 gal/min maximum) |
| Hydraulic Pressure: | 2050-2500 psi | 140-170 bar |
| Elevator width: | 1645 mm | 64.7 in wide chain/slat |
| Jack: | 80 mm | 3.1 in 2-speed screw, with quick adjustment. Designed strong enough for use as quick hitch stand |
| Towing Eye | 50 mm | 2 in in swiveling forged eye |
COMBI RX178
| Round Bales: | 3-8 |
| Medium Square Bales: | 8-10 |
| Large Square Bales (8ft long): | 8-10 |
| Loose Silage (Load Level): | 17 m³ | 22.2 yd³ |
| Loose Silage (Heaped Load): | 20.5 m³ | 26.8 yd³ |
| Maximum Load: | 12,000 kg | 26,455 lb |
| Overall Width: | 3000 mm | 118.1 in |
| Overall Length: | 7820 mm | 307.8 in |
| Overall Height/Loading Height: | 2500 mm | 98.4 in |
| Standard Tyres: | 500/45 x 22.5 Flotation Grip Tread |
| Axle: | Tandem Walking Beam |
| Brakes: | Optional 2 or 4 Wheel Braking |
| Weigh Scales: | Optional Feedlink weighing and feed management system |
| Floors (Bed Floor / Cross Floor): | 15 mm (0.6 in) HD Puck Board / 12 mm (0.47 in) HD Puck Board |
| Chains (Bed / X floor / Elevator): | Chainless / Twin 12,000 lb Roller Chains / Twin 12,000 lb Roller Chains |
| Feed bars (Bed / X Floor / Elevator): | Twin Hydraulic Rams / 65 x 35 RHS / 40 x 40 RHS |
| Joystick: | In-cab Electric Control w/ Bales and Silage Mode |
| Hydraulics Required: | 2 x double-acting |
| Hydraulic Flow: | 50-70 L/min (80 L/min maximum) | 13.2-18.5 gal/min (21.1 gal/min maximum) |
| Hydraulic Pressure: | 2050-2500 psi | 140-170 bar |
| Elevator: | 1645 mm | 64.7 in wide chain/slat |
| Jack: | 80 mm | 3.1 in 2-speed screw, with quick adjustment. Designed strong enough for use as quick hitch stand |
| Towing Eye | 50 mm | 2 in in swiveling forged eye |
COMBI RX218
| Round Bales: | 4-10 |
| Medium Square Bales: | 10-14 |
| Large Square Bales (8ft long): | 10-14 |
| Loose Silage (Load Level): | 21.4 m³ | 27.9 yd³ |
| Loose Silage (Heaped Load): | 26 m³ | 34 yd³ |
| Maximum Load: | 17,000 kg | 37,478 lb |
| Overall Width: | 3035 mm | 119.4 in |
| Overall Length: | 9180 mm | 361.4 in |
| Overall Height | 2650 mm | 104.3 in |
| Standard Tyres: | 500/45 x 22.5 Flotation Grip Tread |
| Axle: | Tridem Steering Suspension Axle |
| Brakes: | Optional 4 or 6 Wheel Braking |
| Weigh Scales: | Optional Feedlink weighing and feed management system |
| Floors (Bed Floor / Cross Floor): | 15 mm (0.6 in) HD Puck Board / 12 mm (0.47 in) HD Puck Board |
| Chains (Bed / X floor / Elevator): | Chainless / Twin 12,000 lb Roller Chains / Twin 12,000 lb Roller Chains |
| Feed bars (Bed / X Floor / Elevator): | Twin Hydraulic Rams / 65 x 35 RHS / 40 x 40 RHS |
| Joystick: | In-cab Electric Control w/ Bales and Silage Mode |
| Hydraulics Required: | 2 x double-acting |
| Hydraulic Flow: | 50-70 L/min (80 L/min maximum) | 13.2-18.5 gal/min (21.1 gal/min maximum) |
| Hydraulic Pressure: | 2050-2500 psi | 140-170 bar |
| Elevator: | 1645 mm | 64.7 in wide chain/slat |
| Jack: | 80 mm | 3.1 in 2-speed screw, with quick adjustment. Designed strong enough for use as quick hitch stand |
| Towing Eye | 50 mm | 2 in in swiveling forged eye |
Specifications
LM180
| Unit Weight | 342kg | 753.9lbs |
| Dimensions (L x W x H) | 1800mm x 1000mm x 845mm | 70.8" x 39.3" x 33.2" |
| Capacity | 0.99m³ | 34.9ft³ |
| Tines (top) | 8 forged tines |
| Clamp | Twin ram clamp |
LM240
| Unit Weight | 430kg | 947.9lbs |
| Dimensions | 2400mm x 1000mm x 845mm | 94.4" x 39.3" x 33.2" |
| Capacity | 1.32m³ | 46.6ft³ |
| Tines (top) | 10 forged tines |
| Clamp | Twin ram clamp |
LX200
| Unit Weight | 541kg | 1192.7lbs |
| Dimensions | 2000mm x 1150mm x 940mm | 78.7" x 45.2" x 37" |
| Capacity | 1.44m³ | 50.8ft³ |
| Tines (top) | 10 forged tines |
| Clamp | Twin ram, split clamp |
LX240
| Unit Weight | 632kg | 1393,3lbs |
| Dimensions | 2400mm x 1150mm x 940mm | 94.4" x 45.2" x 37" |
| Capacity | 1.73m³ | 61ft³ |
| Tines (top) | 11 forged tines |
| Clamp | Twin ram, split clamp |
Specifications
COMBI CM116
| Round Bales: | 3-6 |
| Medium Squares: | 3-6 |
| Large Squares (8ft): | 1-2 |
| Loose Silage (load-level): | 11 m³ | 14.3 yd³ |
| Loose Silage (heaped load): | 12.5 m³ | 16.3 yd³ |
| Maximum Load: | 8,000 kg | 17,636 lb |
| Overall Width: | 2720 mm | 107 in |
| Overall Length: | 6385 mm | 251.3 in |
| Overall Height / Loading Height: | 2300 mm (90.5 in) / 2150 mm (84.6 in) |
| Bin width: | 2290 mm | 90.1 lb |
| Bin length: | 4250 mm | 167.3 in |
| Tare Weight: | 3,590 kg | 794.5 lb |
| Standard Tyres: | 400 / 60 x 15.5 Flotation Grip Tread |
| Axle: | Tandem Walking Beam |
| Brakes: | Optional 2 or 4-wheel braking |
| Weigh Scales: | Optional Feedlink weighing and feed management system |
| Floor material: | Welded Steel |
| Chains (Bed / X floor / Elevator): | Twin 12,000 lb Roller Chains |
| Feed Bars (Bed / X Floor / Elevator): | 65 x 35 RHS / 65 x 35 RHS / 40 x 40 RHS |
| Joystick: | Standard in-cab electric joystick |
| Hydraulics Required: | 2 x double-acting |
| Hydraulic Flow: | 50-70 L/min (80 L/min maximum) | 13.2-18.5 gal/min (21.1 gal/min maximum) |
| Hydraulic Pressure: | 2050-2500 psi | 140-170 bar |
| Elevator: | 1645 mm | 64.7 in wide chain/slat |
| Jack: | 80 mm | 2-speed screw, with quick adjustment. Designed strong enough for use as quick hitch stand |
| Towing Eye: | 50 mm | 3.1 in swiveling forged eye |
COMBI CM156
| Round Bales: | 4-8 |
| Medium Square Bales: | 4-8 |
| Large Square Bales (8ft): | 2-4 |
| Loose Silage (Load Level): | 15 m³ | 19.6 yd³ |
| Loose Silage (Heaped Load): | 17 m³ | 22.2 yd³ |
| Maximum Load: | 10,000 kg | 22,046 lb |
| Overall Width: | 2720 mm | 107 in |
| Overall Length: | 7920 mm | 311.8 in |
| Overall Height / Loading Height: | 2300 mm (2300 in) / 2150 mm (84.6 in) |
| Bin width: | 2290 mm | 90.1 in |
| Bin length: | 5775 mm | 227.3 in |
| Tare Weight: | 4,210kg | 1909 lb |
| Standard Tyres: | 400 / 60 x 15.5 Flotation Grip Tread |
| Axle: | Tandem Walking Beam |
| Brakes: | Optional 2 or 4-wheel braking |
| Weigh Scales: | Optional Feedlink weighing and feed management system |
| Floor material: | Welded Steel |
| Chains (Bed / Cross Floor / Elevator): | Twin 12,000 lb Roller Chains |
| Feed Bars (Bed / Cross Floor / Elevator): | 65 mm x 35 mm RHS / 65 mm x 35 mm RHS / 40 mm x 40 mm RHS |
| Joystick: | Standard in-cab electric joystick |
| Hydraulics Required: | 2 x double-acting |
| Hydraulic Flow: | 50-70 L/min (80 L/min maximum) | 13.2-18.5 gal/min (21.1 gal/min maximum) |
| Hydraulic Pressure: | 2050-2500 psi | 140-170 bar |
| Elevator: | 1645 mm | 64.7 in wide chain/slat |
| Jack: | 80 mm | 2-speed screw, with quick adjustment. Designed strong enough for use as quick hitch stand |
| Towing Eye: | 50 mm | 3.1 in swiveling forged eye |
Specifications
LM260
| Unit Weight | 205kg | 452lb |
| Dimensions (L x W x H) | 2600mm x 845mm x 486mm | 102 1/3” x 33 1/4” x 19 1/8” |
| Blade | 40mm | 1.57" High Tensile SBR Rubber |
| Hydraulic required | N/A |
