Pasture Solutions

Showing all 23 results

• 

  Weed X-Terminator Weed Wiper. Dual Roller 5.7m 3PL

  Quick View Callback Callback
  

  Weed X-Terminator Weed Wiper. Dual Roller 5.7m 3PL

  Dual rollers offer the most cost effective solution to grassland weed control. Only weeds are targeted for massive savings on chemical and it’s eco-friendly.

  Blaney have been pioneers in developing weed wiping technology which has become the most effective proven alternative to boom spraying, thanks to massive savings on chemical. By targeting only the weeds with herbicide, the grass and valuable clover are left untouched and grass growth rate is not affected. Weeds on grassland can be controlled effectively though weed wiping provided the weeds are taller than the grass. Blaney have developed a range of revolutionary patented Weed Wipers to deal with the toughest of weeds. The tractor-mounted wipers, with contact widths from 3m-4,5m, offer a unique solution for weed control even across larger grassland areas.

  Environmental Benefits

  With no off spray, wildlife habitats and species-rich protected areas are less affected and it makes weed control healthier for you too.   For smaller applications or if you can’t access your ground with your tractor why not try our ATV Weed Wipers towed models manufactured by, available in 2.4m widths with flotation tyres as standard to tackle those wetter areas tractor can’t reach!

  CHEMICAL APPLICATION
  Automatic weed detection & chemical application Blaney Agri offer an innovative weed detection system, ensuring all you have to do is fill your tank and drive, and you will have no more need to guess when, where and how much chemical to apply. It is all done for you. The weed detection system automatically activates the system to apply the optimum amount of chemical to the rollers, only when weeds are present, leaving you free to concentrate on driving while saving chemical. This unique chemical control system allows you to regulate the chemical application rate for different weed densities to reduce costs while maximising weed kill. Unique Atomisation Technology Through considerable development time and investment, Blaney Agri has discovered a process of unique atomisation technology, where chemical is applied in the form of microbubbles that attach themselves to the open fibre rollers without bursting. Upon contact with the weeds, the microbubbles burst and provide a better stem coverage than the standard chemical film approach.
  ROLLERS
  Long fibre synthetic rollers Absorbent long fibre rollers ensure less drips and optimum chemical retention and application. Synthetic fibre rollers offer maximum chemical resistance and do not rot. Dual rollers  Dual rollers rotate in opposite directions for optimum chemical application and quick kill. Dual rollers help achieve up to 100% kill rates, without the need to wipe in the other direction, to save time and chemical. The 1st contra-rotating roller lifts the weed and applies chemical to the sensitive underside, rather than the waxy surface for faster kill rates. The 2nd roller acts to separate out clumps of weeds for better application. Chemical is applied to the primary roller, while the second roller absorbs any excess to minimise drips.
  IN-CAB CONTROLS & SYSTEM DIAGONOSTICS
  In-cab Controls & System Diagnostics Fully electronic in-cab controls allow you to operate each section independently, all from the comfort of your tractor seat. Depending on the width of the weed wiper, the controls will control either 1, 2 or 3 wings. System Diagnostics offers an easy troubleshooting aid, taking the fear factor out of the electronic system.
  UV PROTECTED TANK
  Blaney Agri offers a durable UV protected spray tank to hold the water/chemical mix. It is positioned on a raised frame to allow for easy inspection of  the tank contents without having to leave the cab. The 3m wipers come with a 100l tank as standard (shown above) with the option to upgrade to a 230l tank. The weed wipers 4.5m wide and above come with a 230l tank as standard, with an updated tank retaining system.
  ACCESS STEPS
  The image below shows the fold away steps which can be folded out for easy access when filling the tank.
  PUMP
  It comes equipped with a high capacity pump and is equipped with pressure relief. High capacity Fully submersible Four chamber pump Creates more pressure Creates finer droplets More accurate coverage Auto cut-out switch Steady pressure for less waste The pump is cleverly concealed for protection from the elements and any unwanted knocks.
  HEIGHT ADJUSTMENT
  The Weed Wipers have an infinitely adjustable height range from 140mm to 500mm, depending on the tractor linkage. Hydraulic height adjustment is a feature on the 4.5m models and above, for quick and easy repositioning to suit grass and weed height.  It is on the 3m model.
  SPRING SUSPENSION
  An innovative spring suspension system allows for floating over ground contours for accurate and effective weed kill.  The machine can compensate for steep undulations, difficult to control in wider widths.
  FOLD-UP DESIGN
  The Blaney Agri Weed Wipers 4.5m, 5.7m or 6.6m wide all feature an innovative fold up design, for safe road travel and easy travel between fields
  TYRES / GROUND DRIVE
  The weed wipers are equipped with wide profile tyres to minimise tracks and surface damage in wet areas and tight turning circles. The Weed Wipers follow the contours of the ground for effective chemical application. Multiple units are designed to pivot for successful wiping even on undulating land.
  PIVOTING HEADSTOCK
  The innovative pivoting headstock allows the machine to better follow field boundaries (must be lifted at headlands).
  3PT LINKAGE
  The range of weed wipers features standard category 2 three-point linkage. Category 1 and 3 are optional. The tractor-mounted weed wipers are ideal for use on outlying fields since they can be lifted on the linkage to allow you to drive between fields easily, without having the weed wiper rollers engaged and turning.
  ROAD LIGHTING
  Taillights, indicators and brake lights are incorporated into the machine for safe road travel.
  SERVICE ACCESS
  Multiple access points for quick and easy servicing of chemical atomisers.

   

   

   

   

   

   

   

   

   

   

• 

  SMS Smart Drills

  Quick View Callback Callback
  

  SMS Smart Drills

  The SSD 300 is universal seeding machine with 3m working width. The machine is primarily designated for permanent grassland foundation or recultivation, but it can be fully used in field conditions for seeding grain and majority of common crops. A seed is delivered directly into the ground by disc seeding unit and stabilized by roller afterwards. The seed drill machine SMART is highly universal equipment especially for smaller farmers.

  Standard machine version includes:

  • 200 liters seeding unit with hydraulically driven fan
  • Control box 1.2
  • Smooth cylinder (water fillable) with 510 mm diameter and 12mm thickness equipped with scraper
  • Hinge cat. III/2
  • Two rows of seeding units with distance 125 mm between each unit
  • Inter-row distance 125mm
• 

  SMS Roller Drills

  Quick View Callback Callback
  

  SMS Roller Drills

  ROLLER TITAN

  The roller TITAN is a universal machine suitable for meadow and soil cultivation with the widest working width. Thanks to broad variety of additional accessories TITAN can execute variety of operations. Sophisticated machine concept impresses with simplicity, working performance and undemanding maintenance. The roller is made from high strength materials and precisely manufactured that ensures long service life even in the hardest conditions.

  Field use

  • Pre-seeding field preparation
  • Seeding of crops and intercrops
  • Application of fertilizers
  • Compaction after seeding
  • Leveling of rough furrow after ploughing

  Pasture use

  • Land leveling/straightening
  • Grass land aeration
  • Pull up moss and old grass
  • Grass sowing and re-sowing
  • Application of fertilizer

  Concept

  • Robust and reliable frame that allows precise land copying
  • Original system TitanLoc for excellent axial tightening of casted rings on the shaft
  • Wide offer of rollers and supplementary accessories
  • Top quality cast rings and housings made of ductile iron
  • Original hydraulic system for even weight distribution between central and wings frame
  • Terrain coping
• 

  SMS Cambridge Rollers

  Quick View Callback Callback
  

  SMS Cambridge Rollers

  The Essential Companion for Every Farmer

  The SMS Cambridge roller is a ubiquitous machine, a must-have for every farmer. What sets our roller apart is its sophisticated design, which excels in simplicity, working performance, and low-maintenance requirements. Crafted from high-quality materials and precision manufacturing, our product guarantees a long service life, even in the most challenging conditions. With SMS, you're investing in a reliable partner for your agricultural endeavours.

   

  • Our C510/530 Machine Versions are designed to meet your agricultural needs with precision and efficiency.
    

    Key Features

    • A robust and reliable frame that ensures precise land copying.
    • The innovative TitanLoc system for excellent axial tightening of casted rings onto the shaft, guaranteeing lasting performance.
    • A wide selection of rollers and supplementary accessories to customize your equipment.
    • Top-quality cast rings and housings, crafted from ductile iron for exceptional durability.
    • An original hydraulic system that evenly distributes weight between the central and wing frames, ensuring stability and balance.
    • Terrain coping capabilities for versatile use in various landscapes.

    Invest in the future of farming with our C510/530 Machine Versions - the reliable choice for your agricultural needs

• 

  Weed Destroyer Single Roller Weed Wiper – 2.4M Weed Control Machine

  Quick View Callback Callback
  

  Weed Destroyer Single Roller Weed Wiper – 2.4M Weed Control Machine

  Innovative rotating long fibre rollers for maximum kill with minimum drips. Absorbent long fibre synthetic rollers offer less drips, plus optimum chemical retention and application. Equipped with a single contra-rotating roller, it lifts the weed up and applies the chemical to the sensitive underside of the leaf for much faster herbicide absorption and faster weed kill rates.  

  A Blaney Agri herbicide applicator is the ideal solution to treating weeds which are taller than the grass. Unlike boom spraying, Blaney Agri herbicide applicators treat only the weeds giving faster kill rates while saving chemical without stinting the grass and clover growth. Blaney Agri have developed a range of revolutionary weed wipers to deal with the toughest of weeds in an environmentally sensitive way reflecting concern for conservation and preservation of wildlife habitats.

  

  • 60L tank – ATV mounted
  • Manually controlled  poison aplication
  • 3-position drawbar offsettable
  • Knobby 22 -  11 x 8 tyres
  • Ground driven counter-rotating roller
  • 140mm to 380mm no tool height adjustment
  • Drawbar design ensures weeds touch the roller first

  Designed and manufactured in Northern Ireland

• 

  Weed X-Terminator Dual Roller Weed Wiper – 2.4 m Weed Control Machine

  Quick View Callback Callback
  

  Weed X-Terminator Dual Roller Weed Wiper – 2.4 m Weed Control Machine

  A Blaney Agri herbicide applicator is an ideal solution for treating weeds that are taller than the grass. Unlike boom spraying, Blaney herbicide applicators treat only the weeds giving faster kill rates while saving chemicals without stinting grass and clover growth. We've developed a range of revolutionary weed wipers to deal with the toughest of weeds in an environmentally sensitive way reflecting concern for the conservation and preservation of wildlife habitats.

  Innovative dual control rotating long fibre rollers for the maximum kill with minimum drips. Absorbent long fibre synthetic rollers offer fewer drips, plus optimum chemical retention and application. A chemical is applied to the primary roller while the second roller absorbs any excess, resulting in minimum drips.

  • 100L tank mounted on weed wiper
  • Manual control or optional automatic poison control with optical weed detector plus variable rate control
  • Knobby 22 x 11 x 8 tyres
  • Ground driven counter-rotating dual roller system
  • 140mm to 380mm no tool height adjustment
  • Drawbar design ensures weeds touch the role of first
  • 14% less chemical usage - thanks to further R&D on the chemical application process.
  • Durable frame design for extra strength - and even more lightweight.

  Get a Weed X-Terminator Dual Roller Weed Wiper for your acreage today.

  Designed and manufactured in Northern Ireland

• 

  Weed X-Terminator Dual Roller Weed Wiper – 3 m Weed Control Machine

  Quick View Callback Callback
  

  Weed X-Terminator Dual Roller Weed Wiper – 3 m Weed Control Machine

  A Blaney Agri herbicide applicator is an ideal solution for treating weeds that are taller than the grass. Unlike boom spraying, Blaney herbicide applicators treat only the weeds giving faster kill rates while saving chemicals without stinting grass and clover growth. We've developed a range of revolutionary weed wipers to deal with the toughest of weeds in an environmentally sensitive way reflecting concern for the conservation and preservation of wildlife habitats.

  Innovative dual control rotating long fibre rollers for the maximum kill with minimum drips. Absorbent long fibre synthetic rollers offer fewer drips, plus optimum chemical retention and application. A chemical is applied to the primary roller while the second roller absorbs any excess, resulting in minimum drips.

  • 100L tank mounted on weed wiper
  • Manual control or optional automatic poison control with optical weed detector plus variable rate control
  • Knobby 22 x 11 x 8 tyres
  • Ground-driven counter-rotating dual roller system
  • 140mm to 380mm no tool height adjustment
  • Drawbar design ensures weeds touch the role of first
  • 14% less chemical usage - thanks to further R&D on the chemical application process.
  • Durable frame design for extra strength - and even more lightweight.

  Get the Weed X-Terminator Dual Roller Weed Wiper to control weeds on your farm, acreage or commercial operation today.

  Designed and manufactured in Northern Ireland

• 

  Weed X-Terminator Dual Roller Weed Wiper – 3 m 3PL Weed Control Machine

  Quick View Callback Callback
  

  Weed X-Terminator Dual Roller Weed Wiper – 3 m 3PL Weed Control Machine

  Dual rollers offer the most cost effective solution to grassland weed control. Only weeds are targeted for massive savings on chemical and it’s eco-friendly.

  Blaney have been pioneers in developing weed wiping technology which has become the most effective proven alternative to boom spraying, thanks to massive savings on chemical. By targeting only the weeds with herbicide, the grass and valuable clover are left untouched and grass growth rate is not affected. Weeds on grassland can be controlled effectively though weed wiping provided the weeds are taller than the grass. Blaney have developed a range of revolutionary patented Weed Wipers to deal with the toughest of weeds. The tractor-mounted wipers, with contact widths from 3m-4,5m, offer a unique solution for weed control even across larger grassland areas.

  Environmental Benefits

  With no off spray, wildlife habitats and species-rich protected areas are less affected and it makes weed control healthier for you too.   For smaller applications or if you can’t access your ground with your tractor why not try our ATV Weed Wipers towed models manufactured by, available in 2.4m widths with flotation tyres as standard to tackle those wetter areas tractor can’t reach!

  CHEMICAL APPLICATION
  Automatic weed detection & chemical application Blaney Agri offer an innovative weed detection system, ensuring all you have to do is fill your tank and drive, and you will have no more need to guess when, where and how much chemical to apply. It is all done for you. The weed detection system automatically activates the system to apply the optimum amount of chemical to the rollers, only when weeds are present, leaving you free to concentrate on driving while saving chemical. This unique chemical control system allows you to regulate the chemical application rate for different weed densities to reduce costs while maximising weed kill. Unique Atomisation Technology Through considerable development time and investment, Blaney Agri has discovered a process of unique atomisation technology, where chemical is applied in the form of microbubbles that attach themselves to the open fibre rollers without bursting. Upon contact with the weeds, the microbubbles burst and provide a better stem coverage than the standard chemical film approach.
  ROLLERS
  Long fibre synthetic rollers Absorbent long fibre rollers ensure less drips and optimum chemical retention and application. Synthetic fibre rollers offer maximum chemical resistance and do not rot. Dual rollers  Dual rollers rotate in opposite directions for optimum chemical application and quick kill. Dual rollers help achieve up to 100% kill rates, without the need to wipe in the other direction, to save time and chemical. The 1st contra-rotating roller lifts the weed and applies chemical to the sensitive underside, rather than the waxy surface for faster kill rates. The 2nd roller acts to separate out clumps of weeds for better application. Chemical is applied to the primary roller, while the second roller absorbs any excess to minimise drips.
  IN-CAB CONTROLS & SYSTEM DIAGONOSTICS
  In-cab Controls & System Diagnostics Fully electronic in-cab controls allow you to operate each section independently, all from the comfort of your tractor seat. Depending on the width of the weed wiper, the controls will control either 1, 2 or 3 wings. System Diagnostics offers an easy troubleshooting aid, taking the fear factor out of the electronic system.
  UV PROTECTED TANK
  Blaney Agri offers a durable UV protected spray tank to hold the water/chemical mix. It is positioned on a raised frame to allow for easy inspection of  the tank contents without having to leave the cab. The 3m wipers come with a 100l tank as standard (shown above) with the option to upgrade to a 230l tank. The weed wipers 4.5m wide and above come with a 230l tank as standard, with an updated tank retaining system.
  ACCESS STEPS
  The image below shows the fold away steps which can be folded out for easy access when filling the tank.
  PUMP
  It comes equipped with a high capacity pump and is equipped with pressure relief. High capacity Fully submersible Four chamber pump Creates more pressure Creates finer droplets More accurate coverage Auto cut-out switch Steady pressure for less waste The pump is cleverly concealed for protection from the elements and any unwanted knocks.
  HEIGHT ADJUSTMENT
  The Weed Wipers have an infinitely adjustable height range from 140mm to 500mm, depending on the tractor linkage. Hydraulic height adjustment is a feature on the 4.5m models and above, for quick and easy repositioning to suit grass and weed height.  It is on the 3m model.
  SPRING SUSPENSION
  An innovative spring suspension system allows for floating over ground contours for accurate and effective weed kill.  The machine can compensate for steep undulations, difficult to control in wider widths.
  FOLD-UP DESIGN
  The Blaney Agri Weed Wipers 4.5m, 5.7m or 6.6m wide all feature an innovative fold up design, for safe road travel and easy travel between fields
  TYRES / GROUND DRIVE
  The weed wipers are equipped with wide profile tyres to minimise tracks and surface damage in wet areas and tight turning circles. The Weed Wipers follow the contours of the ground for effective chemical application. Multiple units are designed to pivot for successful wiping even on undulating land.
  PIVOTING HEADSTOCK
  The innovative pivoting headstock allows the machine to better follow field boundaries (must be lifted at headlands).
  3PT LINKAGE
  The range of weed wipers features standard category 2 three-point linkage. Category 1 and 3 are optional. The tractor-mounted weed wipers are ideal for use on outlying fields since they can be lifted on the linkage to allow you to drive between fields easily, without having the weed wiper rollers engaged and turning.
  ROAD LIGHTING
  Taillights, indicators and brake lights are incorporated into the machine for safe road travel.
  SERVICE ACCESS
  Multiple access points for quick and easy servicing of chemical atomisers.

   

   

   

   

   

   

   

   

   

   

• 

  Weed X-Terminator Dual Roller Weed Wiper – 4.5 m 3PL Weed Control Machine

  Quick View Callback Callback
  

  Weed X-Terminator Dual Roller Weed Wiper – 4.5 m 3PL Weed Control Machine

  Dual rollers offer the most cost effective solution to grassland weed control. Only weeds are targeted for massive savings on chemical and it’s eco-friendly.

  Blaney have been pioneers in developing weed wiping technology which has become the most effective proven alternative to boom spraying, thanks to massive savings on chemical. By targeting only the weeds with herbicide, the grass and valuable clover are left untouched and grass growth rate is not affected. Weeds on grassland can be controlled effectively though weed wiping provided the weeds are taller than the grass. Blaney have developed a range of revolutionary patented Weed Wipers to deal with the toughest of weeds. The tractor-mounted wipers, with contact widths from 3m-4,5m, offer a unique solution for weed control even across larger grassland areas.

  Environmental Benefits

  With no off spray, wildlife habitats and species-rich protected areas are less affected and it makes weed control healthier for you too.   For smaller applications or if you can’t access your ground with your tractor why not try our ATV Weed Wipers towed models manufactured by, available in 2.4m widths with flotation tyres as standard to tackle those wetter areas tractor can’t reach!

  CHEMICAL APPLICATION
  Automatic weed detection & chemical application Blaney Agri offer an innovative weed detection system, ensuring all you have to do is fill your tank and drive, and you will have no more need to guess when, where and how much chemical to apply. It is all done for you. The weed detection system automatically activates the system to apply the optimum amount of chemical to the rollers, only when weeds are present, leaving you free to concentrate on driving while saving chemical. This unique chemical control system allows you to regulate the chemical application rate for different weed densities to reduce costs while maximising weed kill. Unique Atomisation Technology Through considerable development time and investment, Blaney Agri has discovered a process of unique atomisation technology, where chemical is applied in the form of microbubbles that attach themselves to the open fibre rollers without bursting. Upon contact with the weeds, the microbubbles burst and provide a better stem coverage than the standard chemical film approach.
  ROLLERS
  Long fibre synthetic rollers Absorbent long fibre rollers ensure less drips and optimum chemical retention and application. Synthetic fibre rollers offer maximum chemical resistance and do not rot. Dual rollers  Dual rollers rotate in opposite directions for optimum chemical application and quick kill. Dual rollers help achieve up to 100% kill rates, without the need to wipe in the other direction, to save time and chemical. The 1st contra-rotating roller lifts the weed and applies chemical to the sensitive underside, rather than the waxy surface for faster kill rates. The 2nd roller acts to separate out clumps of weeds for better application. Chemical is applied to the primary roller, while the second roller absorbs any excess to minimise drips.
  IN-CAB CONTROLS & SYSTEM DIAGONOSTICS
  In-cab Controls & System Diagnostics Fully electronic in-cab controls allow you to operate each section independently, all from the comfort of your tractor seat. Depending on the width of the weed wiper, the controls will control either 1, 2 or 3 wings. System Diagnostics offers an easy troubleshooting aid, taking the fear factor out of the electronic system.
  UV PROTECTED TANK
  Blaney Agri offers a durable UV protected spray tank to hold the water/chemical mix. It is positioned on a raised frame to allow for easy inspection of  the tank contents without having to leave the cab. The 3m wipers come with a 100l tank as standard (shown above) with the option to upgrade to a 230l tank. The weed wipers 4.5m wide and above come with a 230l tank as standard, with an updated tank retaining system.
  ACCESS STEPS
  The image below shows the fold away steps which can be folded out for easy access when filling the tank.
  PUMP
  It comes equipped with a high capacity pump and is equipped with pressure relief. High capacity Fully submersible Four chamber pump Creates more pressure Creates finer droplets More accurate coverage Auto cut-out switch Steady pressure for less waste The pump is cleverly concealed for protection from the elements and any unwanted knocks.
  HEIGHT ADJUSTMENT
  The Weed Wipers have an infinitely adjustable height range from 140mm to 500mm, depending on the tractor linkage. Hydraulic height adjustment is a feature on the 4.5m models and above, for quick and easy repositioning to suit grass and weed height.  It is on the 3m model.
  SPRING SUSPENSION
  An innovative spring suspension system allows for floating over ground contours for accurate and effective weed kill.  The machine can compensate for steep undulations, difficult to control in wider widths.
  FOLD-UP DESIGN
  The Blaney Agri Weed Wipers 4.5m, 5.7m or 6.6m wide all feature an innovative fold up design, for safe road travel and easy travel between fields
  TYRES / GROUND DRIVE
  The weed wipers are equipped with wide profile tyres to minimise tracks and surface damage in wet areas and tight turning circles. The Weed Wipers follow the contours of the ground for effective chemical application. Multiple units are designed to pivot for successful wiping even on undulating land.
  PIVOTING HEADSTOCK
  The innovative pivoting headstock allows the machine to better follow field boundaries (must be lifted at headlands).
  3PT LINKAGE
  The range of weed wipers features standard category 2 three-point linkage. Category 1 and 3 are optional. The tractor-mounted weed wipers are ideal for use on outlying fields since they can be lifted on the linkage to allow you to drive between fields easily, without having the weed wiper rollers engaged and turning.
  ROAD LIGHTING
  Taillights, indicators and brake lights are incorporated into the machine for safe road travel.
  SERVICE ACCESS
  Multiple access points for quick and easy servicing of chemical atomisers.

   

   

   

   

   

   

   

   

   

   

• 

  TST – V 400 – 640

  Quick View Callback Callback
  

  TST – V 400 – 640

  Standard Equipment - 3 points ISO universal reinforced hitch with 2nd/3rd category oscillating fork (TST-V 400÷500) - 3 points ISO universal reinforced hitch with 3rd category oscillating fork (TST-V 600/640) - Gearbox with free wheel 1000', 1 pto - Counter-knife - Screwed hood liner - Rear roller adjustable in height with scraper - Opening rear door for maintenance - Locking safety system in closed position with automatic sequential release - Central cardan shaft with disk clutch  soft-start (tractor side fork 1” 3/8 Z6) - Rear light kit with road travel tables kit - Side protection blades - Front protection flaps - EC guard kit

  

• 

  TSL – V 320 – 460

  Quick View Callback Callback
  

  TSL – V 320 – 460

  Standard Equipment - 3 points ISO universal reinforced hitch with 2nd category oscillating fork (2nd/3rd cat. pins) - Gearbox with free wheel 1000', 1 pto - Counter-knife - Screwed hood liner - Rear roller adjustable in height with scraper - Opening rear door for maintenance - Locking safety system in closed position with automatic sequential release - Direct cardan shaft (tractor side fork 1” 3/8 Z6) - Rear light kit with road travel tables kit - Side protection blades - Front protection flaps - EC guard kit

  

• 

  TDF DT 230 – 400

  Quick View Callback Callback
  

  TDF DT 230 – 400

  Standard Equipment - 3 points ISO universal hitch with  **category fork - Gearbox with free wheel 1000', 1 pto, mod. Vigolo C810 - Double transmission - Double rotor on TDF 400 DTDR - Adjustable and shaped counter-knife - Frame with increased thickness with screwed hood liner - Rear roller adjustable in height with scraper - Lateral tie-rods - Opening rear door for maintenance - Direct cardan shaft (tractor side fork 1” 3/8 Z6) - Side protection blades - Front protection chains - EC guard kit

  

• 

  TDF 200 – 300

  Quick View Callback Callback
  

  TDF 200 – 300

  Standard Equipment - 3 points ISO universal hitch with  **category fork - Gearbox with free wheel 1000', 1 pto, mod. Vigolo E810 - Arrangement  for version 540' with inversion of the pulleys - Adjustable and shaped counter-knife - Frame with increased thickness with screwed hood liner - Manual side shift through double tube of headstock - Rear roller adjustable in height with scraper - Opening rear door for maintenance - Direct cardan shaft (tractor side fork 1” 3/8 Z6) - Side protection blades - Front protection chains - EC guard kit

  

• 

  TST-DT 250 – 400

  Quick View Callback Callback
  

  TST-DT 250 – 400

  Standard Equipment - 3 points ISO universal hitch with  **category fork - Gearbox with free wheel 1000', 1 pto, mod. Vigolo C810 - Double transmission - Double rotor on TST 400 DTDR - Adjustable counter-knife - Screwed hood liner - Rear roller adjustable in height with scraper - Lateral tie-rods - Opening rear door for maintenance - Direct cardan shaft (tractor side fork 1” 3/8 Z6) - Side protection blades - Front protection flaps - EC guard kit

  

• 

  TST 180 – 300

  Quick View Callback Callback
  

  TST 180 – 300

  Standard Equipment - 3 points ISO universal hitch with  **category fork - Gearbox with free wheel 540', 1 pto, mod. Vigolo L810 - Arrangement  for version 1000' with inversion of the pulleys - Adjustable counter-knife - Manual side shift - Self-cleaning rear roller adjustable in height with scraper - Opening rear door for maintenance - Direct cardan shaft (tractor side fork 1” 3/8 Z6) - Side protection blades - Front protection flaps - EC guard kit

  

• 

  TSL 130 – 250

  Quick View Callback Callback
  

  TSL 130 – 250

  Standard Equipment - 3 points ISO universal hitch with  **category fork - Gearbox with free wheel 540', 1 pto, mod. Vigolo F810 - Counter-knife - Manual side shift - Self-cleaning rear roller adjustable in height with scraper - Opening rear door for maintenance - Direct cardan shaft (tractor side fork 1” 3/8 Z6) - Side protection blades - Front protection flaps - EC guard kit

  

• 

  RSA/R MAX Mulcher – Low Body 180-320

  Quick View Callback Callback
  

  RSA/R MAX Mulcher – Low Body 180-320

  Standard Equipment - 3 points ISO universal hitch with 2nd category fork, double headstock for front and rear use - Gearbox with free wheel 1000', 2 pto, mod. Vigolo L810 (RSA/R MAX 180÷250) - Gearbox with free wheel 1000', 2 pto, mod. Vigolo E810 (RSA/R MAX 280÷320) - Arrangement  for version 540' with inversion of the pulleys - Reinforced double frame - Triple counter-knife - Hydraulic side shift through double tube of headstock - Rear roller adjustable in height with scraper, increased bearings - Front rounded and flattened side - Direct cardan shaft ( tractor side fork 1” 3/8 Z6) - Front protection flaps - EC guard kit

  

• 

  RSA MAX Mulcher – Low Body 180-320

  Quick View Callback Callback
  

  RSA MAX Mulcher – Low Body 180-320

  Standard Equipment - 3 points ISO universal hitch with 2nd category fork - Gearbox with free wheel 540', 1 pto, mod. Vigolo L810 (RSA MAX 180÷250) - Gearbox with free wheel 1000', 1 pto, mod. Vigolo E810 (RSA MAX 280÷320) - Arrangement  for version 540'/1000' with inversion of the pulleys - Reinforced double frame - Triple counter-knife - Hydraulic side shift through double tube of headstock - Rear roller adjustable in height with scraper, increased bearings - Front rounded and flattened side - Opening rear door for maintenance - Direct cardan shaft (tractor side fork 1” 3/8 Z6) - Front protection flaps - EC guard kit

  

• 

  MX/R Mulcher – Low Body 200-300

  Quick View Callback Callback
  

  MX/R Mulcher – Low Body 200-300

  Standard Equipment - 3 points ISO universal hitch with 2nd category fork, double headstock for front and rear use - Gearbox with free wheel 1000', 2 pto, mod. Vigolo L810 (MX/R 200÷300) - Arrangement  for version 540' with inversion of the pulleys - Reinforced double frame - Triple counter-knife - Hydraulic side shift through double tube of headstock - Rear roller adjustable in position with scraper or self-cleaning - Closed shredding chamber with increased volume for material internal discharge - Direct cardan shaft (tractor side fork 1” 3/8 Z6) - Front protection flaps - EC guard kit

  

• 

  MU2 Mulcher – Low Body 100-250

  Quick View Callback Callback
  

  MU2 Mulcher – Low Body 100-250

  Standard Equipment - 3 points ISO universal hitch with 1st category fork (MU2 100÷140) - 3 points ISO universal hitch with 1st/2nd category fork (MU2 150÷250) - Gearbox with free wheel 540', 1 pto, mod. Vigolo F810 - Arrangement  for version 1000' with inversion of the pulleys - Double counter-knife - Manual side shift - Rear roller adjustable in position with scraper or self-cleaning - Closed shredding chamber with increased volume for material internal discharge - Direct cardan shaft (tractor side fork 1” 3/8 Z6) - Front protection flaps - EC guard kit

  

• 

  TK2/R Mulcher – Low Body 100-200

  Quick View Callback Callback
  

  TK2/R Mulcher – Low Body 100-200

  Standard Equipment - 3 points ISO universal hitch with 1st category fork, double headstock for front and rear use - Gearbox with free wheel 1000', 2 pto - Hydraulic side shift - Rear roller adjustable in position with scraper or self-cleaning - Closed shredding chamber with increased volume for material internal discharge - Direct cardan shaft (tractor side fork 1” 3/8 Z6) - Front protection flaps - EC guard kit

  

• 

  TK2 Mulcher – Low Body 100-200

  Quick View Callback Callback
  

  TK2 Mulcher – Low Body 100-200

  Standard Equipment - 3 points ISO universal hitch with 1st category fork - Gearbox with free wheel 540', 1 pto - Manual side shift - Rear roller adjustable in position with scraper or self-cleaning - Closed shredding chamber with increased volume for material internal discharge - Direct cardan shaft (tractor side fork 1” 3/8 Z6) - Front protection flaps - EC guard kit

  

• 

  RSA Mulcher – Low Body

  Quick View Callback Callback
  

  RSA Mulcher – Low Body

  The VIGOLO RSA low body mulcher is suited for grass cutting, and timber work between 0-8cm dia. Suited to tractors between 40-120HP tractors. Standard Fitment:

  • Rotor With Hammers
  • PTO Drive Shaft (1"3/8 6 spline) 540RPM
  • Skids with Lower Plates
  • 193mm Rear Roller
  • Hydraulic Side Shift
  • Rear Opening Door (W/Pickup Spikes Provision)
  • Double Freewheel Gearbox
  • Double Hood-Liner
  • Front Chain Guards
  • Double Frame Headstock

  Optional Equipment:

  • Pickup Spikes