Brands

Equipment Range

3PL Sprayer Medium Frame 1200L

Goldacres Mounted and Linkage Sprayers

For farmers or contractors looking for a higher capacity 3PL with larger tank volumes and wider booms the medium frame range has you covered.

Central to the design is the high strength frame which can support a 1200L tank and booms in three different styles of up to 18m in width. Each sprayer is individually built to suit your requirements from our extensive range of options.

Request a callback





     

    Description

    Typical uses

    Features 1200L
    Broadacre spraying
    Rowcrop spraying
    Vegetable spraying
    Horticultural spraying
    Weed control
    Pest control
    Industrial spraying
    Municipal spraying
    Contracting
    Specialised cleaning
    Inoculent spraying
    Fertiliser application
    Fire Fighting
    Water transfer
    Irrigation
    Washdown

    Features

    Features
    1. The frame utilizes metric size Australian made steel to create a light yet extremely strong structure. The key to its strength is the combination of square and rectangle hollow sections (SHS & RHS) and precision laser cut plates placed in strategic locations. The frame is also very narrow which helps to keep the boom as close as possible to the tractor wheels for better weight distribution. Wide retractable support legs provide stability when the sprayer is disconnected from the tractor.
    2. Goldacres four stage paint process. 1. Grit blasting which cleans and prepares the steel surface for the ultimate paint adhesion. 2. High build primer / filler flattens out the surface and is key to giving the top coat not only an optimum substrate to adhere to but that smooth “wet” look. 3. Wet top coat using the highest quality Australian made paint. Specially formulated for Goldacres, the top coat provides a finish which has excellent mar resistance (the resistance to abrasive action like scratching) and also a very high tolerance to aggressive chemicals. 4. High-temperature baking which cures the paint
    3. Australian made 1200L rotationally moulded thick wall UV stable tank with an extra deep centre sump design. Smooth internal wall aids rinsing and decontamination.
    4. 45L rinse tank is fitted which can be used to flush out the pump and boom lines at the end of the spray job whilst still in the field.
    5. Extra large hinged lid makes pouring in liquid or powder chemicals mess free.
    6. High volume high pressure (140 l/min 20 bar) three piston diaphragm pump with 540 rpm PTO shaft provides smooth consistent water flow to the boom or spray gun.
    7. pump suction filter with three-way ball valve allows the operator to switch between drawing from the main tank and the rinse tank. The off position also allows the strainer to be removed and cleaned even when the sprayer tank is full.
    8. Twin pressure line filters greatly reduce the chances of nozzle blockages. The first filter is a coarse mesh while the second is finer.
    9. Venturi agitator fitted to the tank greatly improves the consistency of the tank mix over the course of the spray job.
    10. 23L handwash tank with provision to store a liquid soap dispenser
    11. Chemical venturi probe is used to draw chemicals into the main tank. This type of chemical induction means that at no stage does neat chemical come into contact with the pump, which could cause corrosion problems.
    12. Top mounted bottom fill allows the water to be pumped in through the top of the tank and down to the bottom. This method reduces foaming and also minimises the risk of contaminating the water source if the transfer pump stops unexpectedly.
    13. All spray hoses are constructed using a Nitrile liner. This liner helps resist the effects of the most aggressive of chemicals from damaging the hose.
    14. Electric section and pressure regulation control is fitted for easy in cab adjustment. While an external control station is used to operate auxiliary functions like chemical transfer and agitating. An adjustable pressure regulator valve is fitted to set the maximum system pressure.
    15. Front mounted tank level sight tube allows the operator to visually check from within the tractor.

    Options

    Induction hopper. The 40L capacity chemical induction hopper is an integrated chemical transfer system that allows liquids, granular and powdered products to be measured and transferred into the main tank. The hopper has both drum and internal rinsing capabilities. The high flow venturi is mounted at the base of the hopper which draws chemical into the water stream at that point, minimising the chance of blockages.

    Plumbed from the external filling point the internal tank rinse nozzle with rotating head quickly and easily decontaminates the inside of the tank.

    Raven SCS450 controller adjusts the flow rate according to speed to maintain a consistent spray application rate. Features include up to five boom section control, two pre-set application rates plus a manual mode, display of ground speed and flow rate plus other counters.


    ISO BUS control system. This system allows the sprayer to be controlled using a virtual terminal (VT) which might also be used for other duties, like mapping or tractor steering. The brains of the system, called a node is mounted to the sprayer, this node does all the control work. The VT simply displays and communicates all the information to the operator.


    Do away with the pto shaft with a hydraulic drive kit. Neatly adapts to the existing pump and is run directly from the tractor remotes. When used in conjunction with the Raven SCS450 then pump rpm can also be monitored. If a non-Raven monitor is fitted then Goldacres can supply a separate pump rpm monitor.

    Double sided 22L foam marker is ideal for operators wanting a cost effective method of guidance. Can switch from left to right hand side within the cabin.

    30m hose reel with a choice of three different spray guns, TeeJet AA30, TeeJet AA43 and Turbo 400

    Configurable specifications

    Features With Krono style booms With Delta style booms With Crossover style booms
    140 l/min diaphragm pump with PTO drive Standard
    Hydraulic drive for pump Option
    30m manual wind hose reel Option
    AA30 gunjet Option
    AA43 gunjet Option
    Turbo 400 gunjet Option
    Top mounted bottom fill Standard
    Chemical venturi probe Standard
    Tank agitator Standard
    Suction filter & twin pressure filters Standard
    Rinse tank 45L Standard
    Separate 23L hand wash tank Standard
    Foam marker double sided 22L Option
    In cab section control with electric pressure regulation Standard
    Automatic rate controller Raven SCS450 Option
    ISO BUS control system Option
    Boom plumbed in 3 sections Standard
    Boom plumbed in 4 sections Option
    Boom plumbed in 5 sections Option
    Fence line nozzle single sided Option
    Fence line nozzle double sided Option
    Fence line nozzle single sided electric Option
    Fence line nozzle double sided electric Option
    Trijet nozzle bodies Option
    Krono 12m boom Option N/A
    Krono 15m boom with hydraulic lift & slant Option N/A
    Hydraulic lift to suit Krono 12m boom Option N/A
    Boom slant kit to suit Krono 12m boom Option N/A
    Delta 12m boom N/A Option N/A
    Delta 15m boom N/A Option N/A
    Delta 18m boom N/A Option N/A
    Individual boom wing tilt N/A Option N/A
    Crossover 10m boom N/A Option
    Crossover 12m boom N/A Option
    Roller lift boom tower with 900mm travel and suspension N/A Std N/A
    Hydraulic boom height adjustment with 900mm N/A Option
    Twin link suspension suit crossover booms N/A Option
    Electric over hydraulic spool valves for boom functions Option N/A

    Brochures / Catalogues

    2024 Order Silage Trailers Now | Limited stock available & ready for delivery
    This is default text for notification bar