Brands

Equipment Range

Manual Sprayer Booms 3-12m

Boom Sprayers Goldacres

Goldacres booms have forged a reputation in the spraying industry as the strongest design with great standard features.

Request a callback





     

    3m folding

    3m folding

    Vertical folding full aluminum boom. Can be mounted to any vehicle using the supplied mounting hardware or optional boom mount.

    Specifications

    Construction Lightweight aluminum
    Nozzles 6 x IDK120-02 (yellow)
    Nozzle bodies Mounted to stainless steel brackets behind the boom for added protection. TeeJet non-drip.
    Fittings Supplied with u bolts and nuts for mounting to your vehicle
    Weight 6 kg net
    Part No GA4900093

    4m folding

    4m folding

    Using aluminum outer wings to reduce overall weight. Crossfold design acts as a breakaway feature in the event of a collision with an object.

    Specifications

    Construction Mild steel and aluminum
    Nozzles 8 x IDK120-02 (yellow)
    Nozzle bodies Mounted to stainless steel brackets behind the boom for added protection. TeeJet non-drip.
    Fittings Supplied with u bolts and nuts for mounting to your vehicle or optional boom mount frame
    Weight 19 kg net
    Part No GA4900096

    6m folding

    6m folding

    Constructed from mild steel and finished using the Goldacres four stage paint process for the ultimate corrosion resistance. Outer wings feature flip over end section which reduces the overall folded width.
    Crossfold design acts as a breakaway feature in the event of a collision with an object.

    Specifications

    Construction Mild steel
    Nozzles 12 x IDK120-02 (yellow)
    Nozzle bodies Mounted to stainless steel brackets behind the boom for added protection. TeeJet non-drip.
    Fittings Supplied with u bolts and nuts for mounting to your vehicle or optional boom mount frame
    Weight 37 kg net
    Part No GA4907140

    8m folding

    8m folding

    Constructed from mild steel and finished using the Goldacres four stage paint process for the ultimate corrosion resistance. Outer wings feature flip over end section which reduces the overall folded width.
    Crossfold design acts as a breakaway feature in the event of a collision with an object.

    Specifications

    Construction Mild steel
    Nozzles 16 x IDK120-02 (yellow)
    Nozzle bodies Mounted to stainless steel brackets behind the boom for added protection. TeeJet non-drip.
    Fittings Supplied with u bolts and nuts for mounting to your vehicle or optional boom mount frame
    Weight 45 kg net
    Part No GA4900105-MF-NS

    10m crossfold

    10m crossfold

    The manual-folding cross fold boom is constructed using Australian made mild steel in a fully trussed configuration. The trussing gives the boom superior strength and durability for when the going gets rough. The inner wing to centre section connection points are fully bushed and greasable to prolong its working life. The outer wings feature a spring back mechanism to protect the boom in the event of a collision. Non-drip nozzle bodies mounted behind the boom for added protection.

    Hinge

    Greaseable bushed hinges fitted throughout boom.

    Breakaway

    (a) 2D breakaway end tip with (b) rubber mounted stopper (Crossfold only). (c) Stainless steel nozzle brackets position behind boom wing.

    Specifications

    Construction Mild steel
    Nozzles 20 x IDK120-02 (yellow)
    Nozzle bodies TeeJet 3/4″ non-drip.
    Fittings 2 x 50mm u bolts, 3m hose and hose clamps
    Weight 127 kg net
    Part No GA4908470

    10 & 12m crossover

    10 & 12m crossover

     

    The manual-folding crossover boom with twin link suspension allows the boom to float over the roughest terrain, keeping the boom level.
    This is important as the quality of the spray job can be greatly affected by the boom being either too high or too low to the target. In addition, boom longevity is greatly improved because the roll stresses are absorbed by the suspension system.

    Catch release handle
    Spring loaded adjustable boom release handle ensures secure boom lock in open position.

    Boom end
    (a) 2D breakaway end tip with (b) rubber mounted stopper. (c) Stainless steel nozzle brackets position behind boom wing.


    Centre boom section with Twinlink suspension
    (a) The boom structure floats on twin links which are supported by greasable sealed roller bearings. The angled links provide self-levelling properties without the need for springs. (b) Rubber roll stoppers provide cushioning in the event of the boom reaching full travel. (c) A dampener connected between the mounting frame and boom limits rapid roll oscillation. (d) The connection between the suspension system and the three-point linkage is via polyurethane bushes. The bushes help maximise shock absorption. (e) Poly slide strip helps transfer yaw forces whilst still allowing the boom to roll freely

    Specifications

    Construction RHS mild steel
    Nozzles IDK 120-02 (yellow)
    Nozzle bodies 1/2″ Teejet non-drip
    Fittings U-bolts & nuts
    10m Weight 230kg
    12m Weight 240kg
    10m Part No GA4908480
    12m Part No GA4908490
    2024 Order Silage Trailers Now | Limited stock available & ready for delivery
    This is default text for notification bar